PRO 1|10 EVO

Mono Amplifier

Ultimate performance. Maximum control: The MOSCONI PRO 1|10 EVO is a powerful mono power amplifier designed for high-performance car audio systems. With up to 3,000 watts RMS at 1 ohm, it provides ample power while maintaining precise control over the speakers. Thanks to its combination of efficient Class-D technology and optimized signal architecture, the PRO 1|10 EVO is ideal for subwoofer and high-power midwoofer applications.

High power density in a compact design: The Class-D amplifier delivers high output power while requiring minimal space and generating low heat. This makes the PRO 1|10 EVO ideal for installations with limited space. Precise signal adjustment is possible without potentiometers.

Precise signal adjustment without potentiometers: Input sensitivity can be adjusted separately for each channel via DIP switches. This allows for consistent and long-lasting settings without the need for mechanical wear parts. Adjustments are made in 0.25-volt increments within the range of 0.25 to 8 volts.

Optimized DirectDSP input: The integrated DirectDSP input allows for direct connection to external DSP systems. Since signal processing in the amplifier is eliminated, the audio signal remains unchanged and low-loss. This is particularly relevant for fully DSP-based systems.

Stable power output under real-world conditions: A microprocessor-controlled power supply ensures stable output power under real-world conditions, even with voltage fluctuations in the vehicle. An internal system monitors temperature and operating status, actively controlling cooling.

• Class-D mono power amplifier
• Up to 3000 W RMS @ 1 Ω
• High damping factor (> 1000) for precise speaker control
• Efficiency-optimized design with low heat generation
• DIP switch configuration for exact signal tuning
• DirectDSP input for unaltered signal routing
• Microprocessor monitoring with temperature-controlled fan
• 4-layer PCB with 70 µm copper for minimal losses

Output Power:

• Output power @ 4 Ω: 1x 1000 W
• Output power @ 2 Ω: 1x 2000 W
• Output power @ 1 Ω: 1x 3000 W

Data:

• Input sensitivity: 0.25-8 V
• Crossover: DDSP mode only
• Signal-to-noise ratio: 120 dB
• Total harmonic distortion: < 0,006%
• Operating voltage: 9-16 V
• Housing: Black aluminum housing in Italian design